Rach147
Victim
I'm no beauty queen
Posts: 52
|
Post by Rach147 on Jan 27, 2014 16:14:33 GMT -5
first off i apologize if this is not in the right thread so recently i got the Charmed Paige series 1 figure off of ebay when i got her the guy already said she had marks on her which i'm fine with but when i went to put her on my shelf to display her she would not stand up i tried the dipping her legs in the hot water and then cold water method DID NOT WORK -_- my question is is there another way i can fix her legs, or am i screwed
|
|
|
Post by elee0031 on Jan 27, 2014 17:54:14 GMT -5
Could you post a picture?
Also how long did you leave her in the boiling water. Generally for the plastic to soften up it takes about 3-5 minutes. Once out of hot water you have to place the figure on a flat surface and bend it back.
I have trouble every now and then with Piper's legs, but you have to do it just right to make it balance. The other option is to drill a hole in each foot and stand it up with a stand that has a peg.
|
|
|
Post by Ouija on Jan 27, 2014 20:08:19 GMT -5
You're definitely not screwed I've found all three are a bit uneven. I've had several copies of all of them for customs and they've always been a mixed bag. BUT - boiling should work. They do get really quite soft. Just hold the legs in position, stood up, until they've cooled down naturally - really no need to use cold water at all, if anything you'll be letting go/grip getting loose in order to put it in cold water I'm guessing? Might take a few tries but should be fairly straight forward
|
|
Rach147
Victim
I'm no beauty queen
Posts: 52
|
Post by Rach147 on Jan 27, 2014 20:37:27 GMT -5
alright thank you elee031 and Ouija
i shall try the boiling and thanks for letting me know mine isn't the only off balanced one
|
|