|
|
Post by bunniesfrightenme on Oct 27, 2004 16:55:09 GMT -5
My season 5 regualr Anya is a NIGHTMARE to stand up!!! and so many ofthe other ones dont go right down into the wee sticking up thingy, so it looks like shes floating. and the anya and couter dont both fit on the base.
other than that theyre AMAZING i was so happy when they came in today!!!!
|
|
|
|
Post by Moe on Oct 27, 2004 17:12:12 GMT -5
The pin on the base is in the wrong place (too centred), so the counter doesn't fit properly.  Damn shame that, as this base could've been the best in the line so far. As for the floating prob, mine doesn't do that, although she does lean forward slightly; but I can live with that.  |
|
|
|
Post by magickstar3 on Oct 27, 2004 19:34:49 GMT -5
I figured out a way to fit Anya and the counter on the base, but it took me a long time to figure it out. It sticks off the base a little though.
|
|
|
|
Post by Dave the Vampire Slayer on Oct 27, 2004 20:00:02 GMT -5
This is how I have mine,  |
|
|
|
Post by cosmicspidey on Oct 28, 2004 0:14:56 GMT -5
My Anya leans forawrd and to the right (her right). I think I might heat up the legs with a hair dryer and hold the them in the position I want until the cool down. I actually have the counter behind my Anya on the non-checkered portion of the base. It pretty much fits.
|
|
|
|
Post by ToodlesMrJim on Oct 28, 2004 3:26:28 GMT -5
simply microwave water for about a min. then stick her feet in they'll become really flexible. Then hold them in the position the way you want her to stand untill the plastic hardens again. I had the same prob with the floating I had to take care of is ASAP. Same with Tara she's leaned too far one way...
|
|
|
|
Post by TheChosenSlayer on Oct 28, 2004 3:43:01 GMT -5
mine stands fine it's omwf anya that leans
|
|
Neo Phoenix
Potential Slayer
Phoenix Invictus
Posts: 338
|
Post by Neo Phoenix on Oct 28, 2004 9:40:53 GMT -5
My Bunny Anya stands perfectly without the costume on and WITHOUT placing her on the peg.
Honestly she must be one of the steadiest figures (along with Vampire Angel) that don't need pegs/bases to balance them.
With the costume on she's a bit unsteady.
|
|
|
|
Post by Demonslayer212 on Oct 28, 2004 14:50:04 GMT -5
My S5 Anya stands up perfectly and it was easy to put the peg in her foot. Guess I was lucky.
|
|
|
|
Post by btvschosen on Oct 28, 2004 15:06:56 GMT -5
my anyanka looked like she was floating so i chopped a bit off the peg and put a bit of brown paint on the top of the peg and she looks fine ;D ;D |
|
|
|
Post by Immortal on Oct 28, 2004 19:59:14 GMT -5
My Anya leans forawrd and to the right (her right). Same with mine.  By the way, thanks for the suggestions guys, hopefully, I can fix her.  |
|
|
|
Post by Becky on Oct 29, 2004 10:57:38 GMT -5
The peg for my Anyanka is too thick! It doesn't fit in the hole in her shoe.
|
|
|
|
Post by Wicca on Oct 30, 2004 8:12:42 GMT -5
I have the same problem, however I have just leant Anya against the counter. Like this:  |
|
Slayer
Potential Slayer
Posts: 337
|
Post by Slayer on Oct 30, 2004 9:31:03 GMT -5
I stand my Anya in the same way Darla stands hers.
PS. Does anyone know the best way to remove the Amulet from normal Anya without spoiling the figure and so you can take it on or off when you want
|
|
|
|
Post by Wicca on Oct 30, 2004 10:01:09 GMT -5
I stand my Anya in the same way Darla stands hers. PS. Does anyone know the best way to remove the Amulet from normal Anya without spoiling the figure and so you can take it on or off when you want There is a small peice of twisted metal on the chain, un twist it and the necklace will come off. However keep the meetal thingy so you can put the necklace back on. |
|
|
|
Post by cosmicspidey on Oct 31, 2004 0:17:16 GMT -5
There is a small peice of twisted metal on the chain, un twist it and the necklace will come off. However keep the meetal thingy so you can put the necklace back on. It helps if you have teeny, tiny fingers. I don't have fingers by any means (for a guy, at least), and it took me like 5 minutes. Why couldn't the head have just popped off like Series 1 Willow? |
|
|
|
Post by The Second Evil on Oct 31, 2004 3:00:11 GMT -5
My OMWF Anya leans slightly to the right (or to her left) - the main problem is that the peg is too tall for the hole in her foot - so it looks like she is lifting her foot up. When I do it, the figure begins to tip off balance. Luckily, using brute force I managed to force the figure really hard onto the peg - so she don't lean as much. I would pose her, with the base where Darla suggested - unfortunatley I got a really crappy paint job on the base, so I'm using the counter to cover it up.
|
|
